Polímeros: Ciência e Tecnologia
https://www.revistapolimeros.org.br/article/doi/10.4322/polimeros.2013.031
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Solid State Polymerization: Its Action on Thermal and Rheological Properties of PET/PC Reactive Blends

Mendes, Luis C.; Pereira, Patricia S. C.

Downloads: 1
Views: 1208

Abstract

The solid state polymerization (SSP) of PET/PC reactive extrusion blends - with and without cobalt catalyst - at different polymer ratios was studied. Thermal and rheological evaluations were performed. DSC results showed changes in the PET’s Tg, Tch, Tm and Xc. The melt flow rate (MFR) decreased for PET and the blends. The intrinsic viscosity increased. The variation in calorimetric and rheological properties might be attributed to the PET’s chain extension reactions – esterification and transesterification. These reactions led to an increase in the PET’s molar mass, consequently shifting the PET’s Tg to lower temperature and PET’s crystallization, besides reducing the blend miscibility and flowability.

Keywords

Rheology, blends, catalysts, PET/PC, thermal properties

References



1. Thakur, M. – “Encyclopedia of Polymer Science and Engineering”, 2nd ed., New York (1986).

2. Chen, S. - J. Polym. Sci. A Polym. Chem., 25, p.533 (1987).

3. Huang, B. & Walsh, J. J. – Polymer, 39, p.6991 (1998). http://dx.doi.org/10.1016/S0032-3861(97)10212-9

4. Papaspyrides, C. D. - “Polymeric Material Encyclopedia”, Salamone, New York (1999).

5. Garret, W. O.; Stephen, E. L.; Jason, A. S.; Paul, V. G. & Kenneth, B. W. - Macromolecules, 36, p.539 (2003).

6. Jansen, M. A. G.; Goossens, J. G. P.; Wit, G.; Bailly, C. & Koning, C. E. - Anal. Chim. Acta., 557, p.19 (2006). http:// dx.doi.org/10.1016/j.aca.2005.05.063

7. Gaymans, R.; Van, U. T. & Schuyer, J. J. - Polym. Sci. A Polym. Chem., 15, p.537 (1977). http://dx.doi.org/10.1002/ pol.1977.170150303

8. Mallon, F.; Beers, K.; Ives, A. & Ray, W. - J. Appl. Polym. Sci., 71, p.1791 (1998).

9. Samant, K. D. & Ng, K. M. - AIChE J., 45, p.1808 (1999). http://dx.doi.org/10.1002/aic.690450816

10. Gross, S.; Roberts, G. D. & Kiserow, J. – Macromolecules, 33, p.40 (2000). http://dx.doi. org/10.1021/ma990901w

11. Ma, Y.; Agarwal, U.; Sikkema, P. & Lemstra, P. – Polymer, 44, p.4085 (2003). http://dx.doi.org/10.1016/S0032- 3861(03)00408-7

12. Volokhina, A.; Kudryavtsev, G.; Skuratov, S. & Bonetskaya, A. - J. Appl. Polym. Sci., 53, p.289 (1961).

13. Gantillon, B.; Spitz, R. & McKenna, T. F. – Macromol. Mater. Eng., 289, p.106 (2004). http://dx.doi.org/10.1002/ mame.200300290

14. Lucas, B.; Seavey, K. C. & Liu, Y. A. - Ind. Eng. Chem. Res., 46, p.190 (2007). http://dx.doi.org/10.1021/ie0601955

15. Gowd, E. B. & Ramesh, C. - Polymer, 46, p.7443 (2005). http://dx.doi.org/10.1016/j.polymer.2005.05.075

16. Algeri, C. & Rovaglio, M. - Ind. Eng. Chem. Res., 43, p.4253 (2004). http://dx.doi.org/10.1021/ie034323q

17. Santana, O. O.; Jabareen, A. A.; Illescas, S. & Maspoch, M. L. – J. Mater. Sci., 45, p.6623 (2010). http://dx.doi. org/10.1007/s10853-010-4753-4

18. American Society for Testing and Materials - ASTM. - “D 1238: Standard test method for flow rates of thermoplastics by extrusion plastometer”, Annual Book of ASTM Standards, Philadelphia (1994).

19. American Society for Testing and Materials - ASTM. - “D 4603: Standard test method for determining inherent viscosity of poly(ethyleneterephthalate) PET”, Annual Book of ASTM Standards, Philadelphia (1994).

20. Mendes, L. C. & Pereira, P. S. C. - Mater. Sci. Appl., 2, p.1033 (2011).
588371937f8c9d0a0c8b4979 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections