Polímeros: Ciência e Tecnologia
Polímeros: Ciência e Tecnologia
Original Article

Effect of concentrations of plasticizers on the sol-gel properties developed from alkoxides precursors

Kunst, Sandra Raquel; Longhi, Marielen; Beltrami, Lilian Vanessa Rossa; Zini, Lucas Pandolphi; Boniatti, Rosiana; Cardoso, Henrique Ribeiro Piaggio; Vega, Maria Rita Ortega; Malfatti, Célia de Fraga

Downloads: 0
Views: 752


Coatings developed through sol-gel method is presented as an interesting replacement to chromium coating. Sol-gel method present advantages as high purity and excellent distribution of the components. The objective of this work is to synthesize and characterize a film obtained by sol-gel route. The film was prepared with 3-(trimethoxysilylpropyl) methacrylate (TMSPMA), tetraethoxysilane (TEOS) and cerium nitrate, using water and ethanol as solvents. Polyethyleneglycol (PEG) plasticizer was added at four different concentrations. The sol was characterized by techniques of viscosity, thermogravimetric analysis (TGA), X-ray diffraction (XRD) nuclear magnetic resonance spectroscopy (NMR) and Fourier transform infrared spectroscopy (FT-IR). The results showed that tetrafunctional alkoxides condensation was retarded by the plasticizer, forming a compact film. The film with 20 g.L-1 of PEG showed the best electrochemical behavior.


sol-gel, hybrid film, TEOS, TMSPMA, PEG.


1. Certhoux, E., Ansart, F., Turq, V., Bonino, J. P., Sobrino, J. M., Garcia, J., & Reby, J. (2013). New sol-gel formulations to increase the barrier effect of a protective coating against the corrosion of steels. Progress in Organic Coatings, 76(1), 165-172. http://dx.doi.org/10.1016/j.porgcoat.2012.09.002.

2. Hu, H., Li, N., Cheng, J., & Chen, L. (2009). Corrosion behavior of chromium-free dacromet coating in seawater. Journal of Alloys and Compounds, 472(1-2), 219-224. http://dx.doi.org/10.1016/j.jallcom.2008.04.029.

3. Hansal, W. E. G., Hansal, S., Pölzler, M., Kornherr, A., Zifferer, G., & Nauer, G. E. (2006). Investigation of polysiloxane coatings as corrosion inhibitors of zinc surfaces. Surface and Coatings Technology, 200(9), 3056-3063. http://dx.doi.org/10.1016/j.surfcoat.2005.01.049.

4. Merlatti, C., Perrin, F. X., Aragon, E., & Margaillan, A. (2008). Evaluation of physico-chemical changes in sub-layers of multi-layer anticorrosive marine paint systems: plasticizer and solvent release. Progress in Organic Coatings, 61(1), 53-62. http://dx.doi.org/10.1016/j.porgcoat.2007.09.001.

5. Wang, D., & Bierwagen, G. P. (2009). Sol-gel coatings on metals for corrosion protection. Progress in Organic Coatings, 64(4), 327-338. http://dx.doi.org/10.1016/j.porgcoat.2008.08.010.

6. Zhu, D., & Van Ooij, W. J. (2003). Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloride solution. Part 2: mechanism for corrosion protection. Corrosion Science, 45(10), 2177-2197. http://dx.doi.org/10.1016/S0010-938X(03)00061-1.

7. Seth, A., Van Ooij, W. J., Puomi, P., Yin, Z., Ashirgade, A., Bafna, S., & Shivane, C. (2007). Novel, one-step, chromate-free coatings containing anticorrosion pigments for metals: an overview and mechanistic study. Progress in Organic Coatings, 58(2-3), 136-145. http://dx.doi.org/10.1016/j.porgcoat.2006.08.030.

8. Vanin, F. M., Sobral, P. J. A., Menegalli, F. C., Carvalho, R. A., & Habitante, A. M. Q. B. (2005). Effects of plasticizers and their concentrations on thermal and functional properties of gelatin-based films. Food Hydrocolloids, 19(5), 899-907. http://dx.doi.org/10.1016/j.foodhyd.2004.12.003.

9. Sanchez, C., Julián, B., Belleville, P., & Popall, M. (2005). Applications of hybrid organic-inorganic nanocomposites. Journal of Materials Chemistry, 15(35-36), 3559. http://dx.doi.org/10.1039/b509097k.

10. Brinker, C. J. (1990). Sol-gel science: the physics and chemistry of sol-gel processing. Boston: Academic Press.

11. Martin, J., Hosticka, B., Lattimer, C., & Norris, P. (2001). Mechanical and acoustical properties as a function of PEG concentration in macroporous silica gels. Journal of Non-Crystalline Solids, 285(1-3), 222-229. http://dx.doi.org/10.1016/S0022-3093(01)00457-4.

12. Oh, C., Do Ki, C., Young Chang, J., & Oh, S.-G. (2005). Preparation of PEG-grafted silica particles using emulsion method. Materials Letters, 59(8-9), 929-933. http://dx.doi.org/10.1016/j.matlet.2004.09.048.

13. Costa, E. (1998). Preparação e caracterização de filmes finos sol-gel de Nb2O5-TiO2 (Doctoral thesis). University of São Paulo, São Paulo.

14. Kunst, S. R., Beltrami, L. V. R., Cardoso, H. R. P., Veja, M. R. O., Baldin, E. K. K., Menezes, T. L., & Malfatti, C. F. (2014). Effect of curing temperature and architectural (monolayer and bilayer) of hybrid films modified with polyethylene glycol for the corrosion protection on tinplate. Materials Research, 17(4), 1071-1081. http://dx.doi.org/10.1590/1516-1439.284614.

15. Hiratsuka, R., Santilli, C., & Pulcinelli, S. (1995). O processo sol-gel: uma visão físico-química. Química Nova, 18(2), 171-180. Retrieved in 2016, October 12, from http://quimicanova.sbq.org.br/detalhe_artigo.asp?id=4794

16. Sabadini, E. Estudo fisico-químico de polietileno glicol com água e sorventes aromáticos (Doctoral thesis). University of Campinas, Campinas.

17. de Oliveira, M. F. (2006). Estudo da influência de organo-silanos na resistência à corrosão de aço-carbono por meio de técnicas eletroquímicas (Doctoral thesis). University of São Paulo, São Paulo.

18. Pardal, F., Lapinte, V., & Robin, J.-J. (2009). Modification of silica nanoparticles by grafting of copolymers containing organosilane and fluorine moieties. Journal of Polymer Science. Part A, Polymer Chemistry, 47(18), 4617-4628. http://dx.doi.org/10.1002/pola.23513.

19. Yang, H., Feng, L., Wang, C., Zhao, W., & Li, X. (2012). Confinement effect of SiO2 framework on phase change of PEG in shape-stabilized PEG/SiO2 composites. European Polymer Journal, 48(4), 803-810. http://dx.doi.org/10.1016/j.eurpolymj.2012.01.016.

20. Solomons, T. W. G. (2011). Organic chemistry. Hoboken: Wiley.

21. Suegama, P. H., Sarmento, V. H. V., Montemor, M. F., Benedetti, A. V., de Melo, H. G., Aoki, I. V., & Santilli, C. V. (2010). Effect of cerium (IV) ions on the anticorrosion properties of siloxane-poly(methyl methacrylate) based film applied on tin coated steel. Electrochimica Acta, 55(18), 5100-5109. http://dx.doi.org/10.1016/j.electacta.2010.04.002.

22. Han, Y.-H., Taylor, A., Mantle, M. D., & Knowles, K. M. (2007). UV curing of organic-inorganic hybrid coating materials. Journal of Sol-Gel Science and Technology, 43(1), 111-123. http://dx.doi.org/10.1007/s10971-007-1544-8.

23. Cambon, J.-B., Esteban, J., Ansart, F., Bonino, J.-P., Turq, V., Santagneli, S. H., Santilli, C. V., & Pulcinelli, S. H. (2012). Effect of cerium on structure modifications of a hybrid sol-gel coating, its mechanical properties and anti-corrosion behavior. Materials Research Bulletin, 47(11), 3170-3176. http://dx.doi.org/10.1016/j.materresbull.2012.08.034.

24. Chang, T. C., Wang, Y. T., Hong, Y. S., & Chiu, Y. S. (2010). Organic-inorganic hybrid materials. V. Dynamics and degradation of poly(methyl methacrylate) silica hybrids. Journal of Polymer Science. Part A, Polymer Chemistry, 38(11), 1972-1980. http://dx.doi.org/10.1002/(SICI)1099-0518(20000601)38:11<1972::AID-POLA60>3.0.CO;2-5.

25. Yu, Y.-Y., Chen, C.-Y., & Chen, W.-C. (2003). Synthesis and characterization of organic-inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica. Polymer, 44(3), 593-601. http://dx.doi.org/10.1016/S0032-3861(02)00824-8.

26. Mohseni, M., Bastani, S., & Jannesari, A. (2014). Influence of silane structure on curing behavior and surface properties of sol-gel based UV-curable organic-inorganic hybrid coatings. Progress in Organic Coatings, 77(7), 1191-1199. http://dx.doi.org/10.1016/j.porgcoat.2014.04.008.

27. Stuart, B. (2004). Infrared spectroscopy: fundamentals and applications. Chichester: John Wiley & Sons.

28. Flis, J., & Kanoza, M. (2006). Electrochemical and surface analytical study of vinyl-triethoxy silane films on iron after exposure to air. Electrochimica Acta, 51(11), 2338-2345. http://dx.doi.org/10.1016/j.electacta.2005.01.065.

5b7c1e5f0e8825bd28896e57 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections