Polímeros: Ciência e Tecnologia
https://www.revistapolimeros.org.br/doi/10.1590/0104-1428.1920?lang=en
Polímeros: Ciência e Tecnologia
Scientific & Technical Article

Investigação do efeito do tempo de exposição à temperatura ambiente e ao tempo de estocagem de um filme adesivo estrutural de resina epoxídica

Investigation of the effect of exposure time at room temperature in a structural epoxy resin adhesive film

Silva, Ana Carolina Teixeira Neves da; Guilherme, Fernanda; Ferrari, Vanesa Mitchell; Ferrari, Paulo Eduardo

Downloads: 0
Views: 1051

Resumo

A exposição de filmes adesivos de resina epoxídica à temperatura ambiente propicia condições que afetam diretamente suas propriedades físicas. Para o adesivo estrutural AF191, de aplicação no setor aeronáutico, isto pode ser confirmado pela súbita perda de pegajosidade (“tack”). Sendo assim, o comportamento do sistema de resina escolhido foi estudado experimentalmente, expondo-se este ao ambiente de laboratório a intervalos pré-determinados de tempo e a diferentes períodos de armazenamento (–18°C). O efeito da exposição foi analisado por meio de ensaios fisico-químicos baseados em normas internacionais complementados por testes empíricos não normatizados que visaram observar alguns comportamentos especificos da resina, como capacidade de fluxo e solubilidade. A partir dos resultados, foi possível observar alterações no comportamento fisico-químico, que afetam as condições de processabilidade do adesivo, como a capacidade de fluxo do adesivo quando aquecido, redução da aderência e da solubilidade em solvente orgânico. Estas alterações sugerem que houve um possível aumento no número de reticulações da matriz polimérica à temperatura ambiente.Porém este fato não foi comprovadopelo método de análise térmica utilizado (calorimetria exploratória diferencial – DSC), onde não foi observado alteração significativa da entalpia de cura ao longo do período de exposição. Isso pode ser atribuído a uma taxa de cura muito baixa da matriz ou apenas pela falta sensibilidade do método. A mudança de comportamento pode estar associada ao processo de plastificação da matriz polímérica causado pela absorção de umidade devido ao caráter higroscópico da matriz epoxídica, que pode ser verificado no aumento progressivo do ensaio de teor de voláteis. O período de estocagem mostrou que não houve alteração significativa das características avaliadas do adesivo.

Palavras-chave

adesivo, resina epoxídica, cura, fluidez, solubilidade.

Abstract

The exposure of epoxy based adhesive films to room temperature provides conditions that directly affects their physical properties. For structural adhesive AF191, application in the aerospace industry, this can be confirmed by the sudden loss of tack. Therefore, the behavior of the chosen resin system was experimentally studied, by means of the exposure to laboratory environment at pre determinated time interval and different storage periods (–18°C).The effect of the exposure was evaluated by means of physicochemical tests based on international standards, being complimented by not normalized empirical tests that aimed to observe some specific behavior of the resin, like flow and solubility. From the results, it was possible to observe changes in the physicochemical behavior that affects the adhesive processability conditions such as adhesive flow capacity, self adhesiveness reduction and solubility to organic solvent. These changes suggest that there was a possible increase in the number of crosslinking of the polymer matrix at room temperature. This fact however was not proven by the used thermal analysis method (differential scanning calorimetry – DSC), where since there was no significant change in cure enthalpy was observed during the exposure period. This can be attributed to a very low curing rate of the matrix or just low sensitivity of the method. The change in behavior can be related to the lamination process the polymer matrix caused by moisture absorption due to the hygroscopic nature of the epoxy matrix, which can be found in the progressive increase in the volatile content test. The storage period was efficient indicating no significant change in the characteristics evaluated the adhesive.

Keywords

adhesive, epoxy resin, cure, flow, solubility.

References

1. American Society for Testing and Materials – ASTM. (2011). ASTM D907: standard terminology of adhesives. West Conshohocken: ASTM.

2. Sharpe, L. H. (1990). Section1. Fundamentals of adhesives and sealants technology. In ASM. Engineered materials handbook – adhesives and sealants (Vol. 3, pp. 1-72). Materials Park: ASM International.

3. Hexcel. (2003). Handbook Redux® Bonding Technology. Stamford: Hexcel Corporation. Recuperado em 10 de setembro de 2013, de http://www.hexcel.com/Resources/DataSheets/Brochure-Data-Sheets/Adhesive_Bonding_Technology.pdf

4. Petrie, E. M. (2007). Handbook of adhesives and selants (2. ed). New York: The McGraw-Hill Companies.

5. Campbell, F. C. (2006). Manufacturing technology for aerospace structural materials. Amsterdam: Elsevier Science.

6. Schwartz, M. M. (1997). Composite materials: properties, nondestructive testing, and repair. New Jersey: Prentice-Hall Inc.

7. Rezende, M. C., Botelho, E. C., Paiva, J. M. F., & Costa, M. L. (2003). Avaliação Térmica e reológica do ciclo de cura do pré-impregnado de carbono epóxi. Polímeros: Ciência e Tecnologia, 13(3), 188-197. http://dx.doi.org/10.1590/S0104-14282003000300009.

8. Callister, W. D., Jr., & Rethwisch, D. G. (1991). Materials science and engineering an introduction. New York: John Wiley & Sons.

9. Fraga, F., Castro-Díaz, C., Rodrıguez-Nuñez, E., & Martínez-Ageitos, J. M. (2003). Physical aging for an epoxy network diglycidyl ether of bisphenol A/m-xylylenediamine. Polymer, 44(19), 5779-5784. http://dx.doi.org/10.1016/S0032-3861(03)00624-4.

10. Riegel, I. C., Freitas, L. L., & Samios, D. (1999). Envelhecimento físico de sistemas DGEBA/DDM investigado por análise térmica (DSC/DMA). Polímeros: Ciência e Tecnologia, 9(3), 58-64. http://dx.doi.org/10.1590/S0104-14281999000300011.

11. Kim, D., Centea, T., & Nutt, R. (2014). Out-time effects on cure kinetics and viscosity for an out-of-autoclave (OOA) prepreg: Modelling and monitoring. Composites Science and Technology, 100, 63-69. http://dx.doi.org/10.1016/j.compscitech.2014.05.027.

12. Sales, R. C. M., & Dibbern-Brunelli, D. (2008). Efeito higrotérmico em prepregs de fibra de vidro/epóxi por espectroscopia de luminescência. Polímeros: Ciência e Tecnologia, 18(1), 52-56. http://dx.doi.org/10.1590/S0104-14282008000100011.

13. Yagoubi, J. E., Lubineau, G., Traidia, A., & Verdu, J. (2015). Monitoring and simulations of hydrolysis in epoxy matrix composites during hygrothermal aging. Composites. Part A, Applied Science and Manufacturing, 68, 184-192. http://dx.doi.org/10.1016/j.compositesa.2014.10.002.

14. Ray, B. C. (2006). Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites. Journal of Colloid and Interface Science, 298(1), 111-117. http://dx.doi.org/10.1016/j.jcis.2005.12.023. PMid:16386268.

15. Sales, R. C. M., Diniz, M. F., Dutra, R. C. L., Thim, G. P., & Dibbern-Brunelli, D. (2010). Thermal curing of glass-epoxy prepregs by luminescence spectroscopy. Journal of Applied Polymer Science, 117(2), 664-671. http://dx.doi.org/10.1002/app.31953.

16. Twisk, J. V., & Aker, S. C. (1990). Storing adhesives and sealant materials. In ASM. Engineered materials handbook – adhesives and sealants (Vol. 3, pp. 683-686). Materials Park: ASM International.

17. American Society for Testing and Materials – ASTM. (1999). ASTM D3532/D3532M: gel time of carbon fiber-epoxy prepreg. West Conshohocken: ASTM.

18. American Society for Testing and Materials – ASTM. (1997). ASTM D3530/D3530-M: volatiles content of composite material prepreg.West Conshohocken: ASTM.

19. American Society for Testing and Materials – ASTM. (2011). ASTM D3531/D3531-M: resin flow of carbon fiber-epoxy prepreg.West Conshohocken: ASTM.

20. National Center for Advanced Materials Performance – NCAMP. NMS 5320: material specification. Wichita: National Institute for Aviation Research.

21. Rhodia Solvay Group. (2013). Rhodiasolv® PolarClean. Solvay. Recuperado em 09 de setembro de 2013, de http://www.rhodia.com.br/pt/mercados-e-produtos/catalogo-de-produtos/Rhodiasolv-PolarClean.html

22. Lucas, E. F., Soares, B. G., & Monteiro, E. E. C. (2001). Caracterização de polímeros: determinação de peso molecular e análise térmica. Rio de Janeiro: E-papers.
588371d57f8c9d0a0c8b4aa2 polimeros Articles
Links & Downloads

Polímeros: Ciência e Tecnologia

Share this page
Page Sections